Wall mounting your flat panel Tv creates a nice touch for a living room or residence theatre space. There are actually some challenges a house owner will face in order to do the job proper, such as offering a hidden power outlet for the Television and hiding the audio and component cables that really need to run back to the cable box or home theatre technique. If they are beyond your knowledge, you could possibly must employ South Charlotte TV Wall Mounting to perform these tasks.
For those who choose to take on these tasks oneself, here is the way to do it inside a nutshell.
Run Power
First, make sure you have a wall which you can get power to. Obtain an outlet you are able to tie into and that offers a reasonably clear path to run energy inside the wall to the new outlet place. You might ought to cut 4-6″ holes within your drywall for access at strategic locations, then patch them up later. In most cases, you do not have to run the wires inside of conduit, but check your regional creating codes to discover prior to proceeding.
Subsequent, install an “old work” electrical box in a place behind the Television. You could possibly need to utilised a recessed box, which recesses the outlet an inch in to the wall to enable clearance for some of the narrower flush mounted Tv brackets. Now drill holes inside the studs if vital making use of a long versatile drill bit that is produced for that purpose, and run your power in the supply outlet via the studs towards the new outlet inside the wall.
Run Audio/Video Cables
Now that you are ready to run the element and audio cables to the cabinet which will home your cable box or property theatre program. Producers propose a 12 inch minimum separation in between power cords and video cables, so plan accordingly.
Very first, reduce access holes inside your drywall as necessary to run 1″ minimum PVC conduit to act as a “cable chase” for your video and audio cables. Make sure you have adequate space inside the conduit for all of the cables you will need. Buy a length of conduit as well as the appropriate bends to go from a box in the back in the Television towards the cabinet region. You can ought to assemble this cable chase working with your access panels cut into the drywall, and secure the entire assembly towards the studs applying plumber’s strap metal.
Patch Walls
Next, you are able to patch up your walls and place qualified covers on the boxes exactly where your cables come out. Now, run a wire pull (also referred to as a fish tape) through the conduit and measure how long your cables must be. Purchase the suitable cables, and tape them with each other so the connectors will not be bunched up together. Keep in mind, you’ll should match this bundle of cables by way of a pretty tiny tube.
Run your wire pull via the cable chase once more and attach your cable bundle towards the finish. Black electrical tape works wonderful. You are going to also require some conduit lubricant to create your cable pulling quite a bit easier (do not use WD-40 with black electrical tape, it is going to dissolve it and make a mess). Now pull your cable bundle by way of the wall from 1 side to the other, and you now have all the electrical connections you may need to create your wall mounted flat panel Tv function.
Attach Wall Mount Bracket
The final step is always to attach a wall mounting bracket to the wall and hook it up to your Tv. You’ll find distinct sizes and models accessible, but most are universal and fit all TVs inside a specific size range. Instruction for attaching them towards the studs in the wall and for your Tv should really come with the device. Just be certain to comply with these directions, mainly because most flat screen televisions are heavy and should be mounted directly to studs. You cannot use drywall anchors.
Get help to life your flat panel tv onto the new wall mount, and congratulations! You now have a qualified looking residence theatre space.